Moxa Technologies NPort IA5150 series Instrukcja Użytkownika Strona 32
- Strona / 108
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
NPort IA5150/5250 Series User’s Manual Web Console Configuration
5-7
You must assign a valid IP address to NPort IA5150/5250 before it will work in your network
environment. Your network system administrator should provide you with an IP address and
related settings for your network. The IP address must be unique within the network (otherwise,
NPort IA5150/5250 will not have a valid connection to the network). First time users can refer to
Chapter 3, “Initial IP Address Configuration,” for more information.
You can choose from four possible “IP configuration” modes—Static, DHCP, DHCP/BOOTP,
and BOOTP—located under the web console screen’s IP configuration drop-down box.
Method Function Definition
Static User defined IP address, Netmask, Gateway.
DHCP
DHCP Server assigned IP address, Netmask, Gateway, DNS, and Time
Server
DHCP/BOOTP
DHCP Server assigned IP address, Netmask, Gateway, DNS, and Time
Server, or BOOTP Server assigned IP address (if the DHCP Server does not
respond)
BOOTP BOOTP Server assigns IP address
IP Address
Setting Factory Default Necessity
E.g., 192.168.1.1
(IP addresses of the form x.x.x.0 and
x.x.x.255 are invalid.)
192.168.127.254 Required
An IP address is a number assigned to a network device (such as a computer) as a permanent
address on the network. Computers use the IP address to identify and talk to each other over the
network. Choose a proper IP address that is unique and valid in your network environment.
Netmask
Setting Factory Default Necessity
E.g., 255.255.255.0 255.255.255.0 Required
A subnet mask represents all of the network hosts at one geographic location, in one building, or
on the same local area network. When a packet is sent out over the network, the NPort
IA5150/5250 will use the subnet mask to check whether the desired TCP/IP host specified in the
packet is on the local network segment. If the address is on the same network segment as the
NPort IA5150/5250, a connection is established directly from the NPort IA5150/5250. Otherwise,
the connection is established through the given default gateway.
Gateway
Setting Factory Default Necessity
E.g., 192.168.1.1 None Optional
A gateway is a network gateway that acts as an entrance to another network. Usually, the
computers that control traffic within the network or at the local Internet service provider are
gateway nodes. NPort IA5150/5250 needs to know the IP address of the default gateway computer
in order to communicate with the hosts outside the local network environment. For correct
gateway IP address information, consult the network administrator.
- NPort IA5150/5250 Series 1
- User’s Manual 1
- Table of Contents 3
- Introduction 5
- Package Checklist 6
- Product Features 6
- Product Specifications 7
- Getting Started 9
- Panel Layout 10
- Connecting the Hardware 10
- Wiring Requirements 11
- Connecting the Power 11
- Connecting to the Network 12
- LED Indicators 13
- Factory Default IP Address 15
- Telnet Console 16
- Overview 22
- Real COM Mode 22
- TCP Server Mode 23
- TCP Client Mode 24
- UDP Mode 24
- Pair Connection Mode 24
- Ethernet Modem Mode 25
- Reverse Telnet Mode 25
- Disabled Mode 25
- Web Console Configuration 26
- Opening Your Browser 27
- Basic Settings 29
- Web/Telnet Console 30
- Network Settings 31
- SNMP Settings 33
- IP Address Report 34
- Serial Settings 35
- Operating Settings 36
- Pair Connection Slave Mode 51
- AT Commands 53
- S Registers 54
- Auto Warning Settings 57
- Event Type 58
- Power failure 59
- Ethernet1 link down 59
- Ethernet2 link down 59
- DCD changed 60
- DSR changed 60
- Monitor Line 61
- Monitor Async 61
- Monitor Async-Settings 61
- Monitor Relay Output 61
- Change Password 62
- Load Factory Default 62
- Configuration 67
- Broadcast Search 68
- Unlock Password Protection 69
- Upgrading the Firmware 72
- Export Configuration 74
- Import Configuration 74
- Monitor 75
- Port Monitor 81
- On-line COM Mapping 82
- Off-line COM Mapping 87
- IP Location 89
- IP Serial LIB 91
- Example Program 93
- Pinouts and Cable Wiring 94
- Port Pinout Diagrams 95
- Cable Wiring Diagrams 96
- Well Known Port Numbers 97
- Auto IP Report Protocol 103
- Service Information 105
- MOXA Internet Services 106
- Problem Report Form 107
- Product Return Procedure 108
Powiązane produkty i podręczniki dla Networking Moxa Technologies NPort IA5150 series
(46 strony)Rival 4071 manuels
Manuels d'utilisation et guides de l'utilisateur pour Petits appareils de cuisine Rival 4071.
Nous fournissons des manuels en pdf 1 Rival 4071 à télécharger gratuitement par type de document : Manuel de l'utilisateur
Komentarze do niniejszej Instrukcji