Moxa Technologies NPort IA5150 series Instrukcja Użytkownika Pobierz pdf (Strona 37)

9-13

[email protected]

www.moxa.com

NPort® S8455 Series

Device Connectivity

Serial-to-Ethernet Device Servers >

Appearance

Overview

NPort

5600 Series

8 and 16-port RS-232/422/485 rackmount serial device servers

With the NPort® 5600 rackmount series, you not only protect your

current hardware investment, but also allow for future network

expansion by centralizing the management of your serial devices and

distributing management hosts over the network.

Network Readiness for up to 16 Serial Devices

Only basic configuration is needed with the NPort® 5600 to connect

up to 16 serial devices to an Ethernet network.

19-inch Rackmount Device Server

NPort® 5600 device servers come with Tx/Rx LEDs for the serial ports

on the front panel, and 8 or 16 RJ45 serial port connectors on the

rear panel. This makes the NPort® 5600 device servers suitable for

standard 19-inch rack mounting, allowing you to simplify operational,

maintenance, and administrative tasks.

Real COM/TTY Ports

Real COM/TTY drivers are provided to make the serial ports on the

NPort® 5600 recognizable as Real COM ports by Windows, or Real

TTY ports by Linux. In addition to supporting basic data transmission

and reception, the NPort® drivers also support the RTS, CTS, DTR,

DSR, and DCD control signals.

LED Indicators to Ease Your Maintenance Tasks

The System LED, serial Tx/Rx LEDs, and Ethernet LEDs (located

on the RJ45 connector) provide a great tool for basic maintenance

tasks and help engineers analyze problems in the field. The LEDs not

only indicate current system and network status, but also help field

engineers monitor the status of attached serial devices.

Adjustable Termination and Pull High/Low Resistors

When using termination resistors to prevent serial signal reflection,

it is important to set the pull high/low resistors correctly so that the

electrical signal is not corrupted. Since no set of resistor values is

universally compatible for all environments, the NPort® 5650-8/16 has

DIP switches on the bottom panel for setting the termination and pull

high/low resistor values.

Mounting plate

AC power input

100 to 240 VAC input, 47 to 63 HZ

LCD

panel

Reset

button

Push

buttons

LED indicators

system status, serial Tx/Rx

Ethernet

RJ45 10/100 Mbps

AC power switch

Connection cable

RJ45 to DB9 cable

(optional accessory)

› 8 or 16 serial ports supporting RS-232/422/485

› Standard 19-inch rackmount size

› 10/100M auto-sensing Ethernet

› Built-in 15 KV ESD protection for all serial signals

› Easy IP address conguration with LCD panel (excluding wide

temperature models)

› Congure via Telnet/Web/Windows utility

› Socket modes: TCP server/TCP client/UDP/Real COM

› SNMP MIB-II for network management

Note: LCD panel and conﬁguration buttons not available with wide-temp. models

Serial ports (50 bps to 921.6 Kbps, RJ45 connectors)

NPort® 5610: RS-232

NPort® 5630: RS-422/485

NPort® 5650: RS-232/422/485

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 55 56

Komentarze do niniejszej Instrukcji

Brak uwag

Moxa Technologies NPort IA5150 series Instrukcja Użytkownika Strona 37

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking Moxa Technologies NPort IA5150 series