Moxa Technologies EtherDevice Instrukcja Użytkownika Pobierz pdf (Strona 21)

Installing MOXA EtherDevice Server

MOXA EtherDevice Server User’s Manual

2-3

DIN-Rail Mounting

For many industrial applications, you will find it convenient to attach MOXA EtherDevice

Server to a DIN-Rail, as described below. The green plastic DIN-Rail attachment plate

should already be fixed to the back panel of EDS when you take it out of the box. If you

need to reattach the DIN-Rail attachment plate to EDS, be sure the stiff metal spring is

situated towards the top, as shown in the figures below.

STEP 1: Insert the top of the DIN-Rail into

the slot just below the stiff metal

spring. Apply a few pounds of

downward force on the top rear of

the server, and then rotate the

server as shown below.

STEP 2: The DIN-Rail attachment unit

will snap into place as shown

below.

To remove MOXA EtherDevice Server from the DIN-Rail, simply reverse Steps 1 and 2

above. Grasp EDS with both hands, apply a slight amount of downwards force at the top

rear of the server, and then rotate the bottom of the server towards its front panel. When the

bottom of the DIN-Rail loses contact with the attachment plate, simply lift the server up

and away from the DIN-Rail.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 121 122

Brak uwag

Moxa Technologies EtherDevice Instrukcja Użytkownika Strona 21